Home > Ship Launching Airbags >

Henger QINGDAO Marine Ship Launching Rubber Airbag Inflatable

Product Categories

Qingdao Henger Shipping Supply Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Henger QINGDAO Marine Ship Launching Rubber Airbag Inflatable

Name: Henger QINGDAO Marine Ship Launching Rubber Airbag Inflatable
Brand: Henger
Price: 50 USD

Best Henger QINGDAO Marine Ship Launching Rubber Airbag Inflatable wholesale

Brand Name : Henger

Model Number : HE-HPF

Certification : CCS, ABS, LRS, BV, GL, DNV, NK

Place of Origin : China

MOQ : 1PC

Price : USD 50-3000 PER PIECE

Payment Terms : D/A, L/C, D/P, T/T, Western Union, MoneyGram

Supply Ability : 10PCS PER WEEK

Delivery Time : 7-15 WORKING DAYS

Packaging Details : NUDE/PALLET

Product Name : Marine Rubber Airbag / Ship Launching Airbag / Salvage Airbag / Heavy Lifting Airbag

Brand : HENGER

Material : Natural Rubber

Size : D0.5-4.5

Lifespan : 8~10 Years

Layer : 5/ 6/ 7 / 8 / 9 / 10 Layers

Working Pressure : 0.05MPa-0.17MPa

Contact Now

HENGER QINGDAO Inflatable Marine Launching Rubber Ship Airbag

Product description

Features of our QINGDAO HENGER Pneumatic Sea Launch Rubber Boat Airbag:
Fully ISO 14409 compliant
Customizable size and printing
High bearing capacity and air tightness
High resistance to kneading
New structure design of tail end
Optimize structure layout
Long-lasting anti-aging and wear properties
Higher flexibility and shock absorption
The cord plies we produce use polyamide fibers, 3 layers, to extend the life of the airbag

Henger QINGDAO Marine Ship Launching Rubber Airbag Inflatable

Specification

TYPE	Guaranteed Working Pressure
	D=0.8m (D=2.62ft)	D=1.0m (D=3.28ft)	D=1.2m (D=3.94ft)	D=1.5m (D=4.92ft)	D=1.8m (D=5.90ft)	D=2.0m (D=6.56ft)
JZ-3	0.13Mpa (18.85psi)	0.10Mpa (14.50psi)	0.09Mpa (13.05psi)	0.07Mpa (10.15psi)	0.06Mpa (8.70psi)	0.05Mpa (7.25psi)
JZ-4	0.17Mpa (24.66psi)	0.13Mpa (18.85 psi)	0.11Mpa (15.95 psi)	0.09Mpa (13.05psi)	0.08Mpa (11.60psi)	0.07Mpa (10.15psi)
JZ-5	0.21Mpa (30.46psi)	0.17Mpa (24.66psi)	0.13Mpa (20.31psi)	0.11Mpa (15.95psi)	0.09Mpa (13.05psi)	0.08Mpa (11.60psi)
JZ-6	0.25Mpa (36.26psi)	0.20Mpa (29.01psi)	0.17Mpa (24.66psi)	0.13Mpa (18.85psi)	0.11Mpa (15.95psi)	0.10Mpa (14.50psi)

Qingdao henger inflatable marine rubber marine airbag use

Safety issues for overpressure control. Strictly control the working pressure and must not exceed the regulations of the working pressure gauge.
Spikes to avoid. Contact with non-sharp protrusions on the surface of the airbag to prevent puncture.
Prevent deformation. The airbag avoids deformation in the length direction during the rolling process. For example, when a catamaran is landed and dived, it is easy to deform if one airbag is used. So please put two airbags in the catamaran below.
Immunity effects. Shock loads should be avoided after balloon inflation. Especially at the dock where the ship fell, when the airbags were lifted, most of the hull was already lifted. Remind the dock is still tight, don't touch it. Since the piers are cut off, the airbags may burst if affected by the weight of the hull. The airbag pressure should be adjusted so that the wooden piers leave the ship. And when the ship collides with nothing in the process of moving the ship, it will cause serious damage to the airbag.
pressure test. Shortly after repair or before the airbag is restarted, a no-load charging test should be performed before restarting. The test pressure shall be the working pressure. Laboratories and inspectors should be at least 3 meters away from the airbag. If the damaged area is repaired, the operating pressure of the airbag should be reduced. Every year, all common airbags are tested to ensure safe use.

FAQ

1. What material are your airbags and inflatable rubber fenders made of?
 Material: natural rubber + synthetic tire cord layer reinforcement
 2. What are the advantages of your products?
 The inflatable rubber fender made of molds is the only manufacturer in China that produces molds. Unlike handmade products such as tubeless and inner tubes.
 3. What is the shortest delivery time?
 We now have stock sizes of fenders in China, Singapore and Indonesia, and we can ship to you from the nearest warehouse.
 4. What is your MOQ for rubber airbags and fenders?
 MOQ: 1pc Yokohama Fender Price
 5. What is the service life of your rubber airbags and inflatable rubber fenders?
 Airbag life: 6-10 years. Pneumatic rubber fenders have a service life of more than 10 years.
 6. How long is the warranty period for your rubber airbags?
 12 months. Product repair or return due to product quality reasons due to airbag leakage, delamination, airbag head falling off, etc. The repair technology is provided free of charge.
 7. What are your product standards?
 Airbags are manufactured in strict accordance with ISO 14409
 Pneumatic rubber fenders in accordance with ISO 17357:2014
 8. What kind of certificates can you provide?
 DNV.GL, BV CCS LR. Certificate available.

Tom Li
Sales Manager
 
WHATSAPP:+86 15662503695
TEL:+86-15662503695
MY SKYPE:sales1@hengergroup.com
EMAIL:sales1@hengergroup.com
tom-li@hengergroup.com
 
 

Product Tags: